ShenDengen (www.shindengen.com) launched the MCZ5216ST LLC current resonant mode controller IC achieving higher efficiency and lower noise in 100-500W output class power supplies.

The newly developed MCZ5216ST is an LLC current resonance control IC which combines the functionality of the previous MCZ5211ST with built-in X condenser discharge functionality.

Incorporation of this X condenser discharge functionality allows for an approximately 25% reduction in power consumption during standby.
ShenDengen

The original control method (asymmetric control) provides the chip with an active standby function which improves power efficiency during light loads (of several W) and standby, which makes it possible to eliminate the need for the auxiliary power supplies required up until now.

The chip also allows for the operating frequency to be increased up to 500kHz, contributes to power supply miniaturization, and is equipped with a variety of protection functions, making it possible to construct a power supply circuit with a small number of component parts.

· Featuring a built-in X condenser discharge functionality, it has an input voltage detection mode can be selected from either AC or DC. Allowing the transmission of IC operating status through a photo-coupler using a power-good signal (in AC input detection mode), the LLC individual IC is equipped with HV Startup (600V withstand voltage starter circuit).

· Compatible with higher frequencies and capable of constant operation frequencies of 500 kHz, they have a low standby power (built-in active standby function and burst function) and a built-in oscillation frequency compensation function using input voltage during burst (in DC input detection mode).

Applications are power supplies for LBP and other document equipment, audio equipment, FPDs, LED lighting and industrial equipment.

Hordon Kim, hordon@powerelectronics.co.kr




추천기사

댓글 남기기